Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The San Diego Owner’s Guide
KraftMaid bathroom remodeling in San Diego typically runs $10,620 – $33,040 installed, depending on vanity size, countertop material, and whether you’re refreshing a powder room or gutting a master bath. That’s the number we put in writing before any demo starts, and it’s the number on your invoice when we’re done. Most owners call us because a hinge has stripped, a drawer front is peeling at the edge, or a vanity cabinet has swelled from years of San Diego’s coastal humidity and no longer closes square.
We’re an independent San Diego remodeling company, not a KraftMaid dealer or factory service center. That matters because we’re free to tell you when a part is worth replacing versus when the whole vanity should go, and we’re free to use aftermarket hardware where it outperforms the original. Trevor Nash and our crews have pulled apart enough KraftMaid cabinetry to know exactly what fails first and what’s worth saving.
Which KraftMaid Models This Applies To
KraftMaid bathroom cabinetry spans several lines, and the parts are not interchangeable across all of them. The main collections you’ll see in San Diego homes include the entry-level KraftMaid Basics, the mid-tier KraftMaid Venicia and KraftMaid Passport, and the full-custom KraftMaid Vantage. Within each line, door profiles, drawer box construction, and hinge styles differ. A Venicia drawer glide will not mount correctly on a Basics cabinet, and Vantage uses a different hinge cup depth than the other lines.
Before we quote replacement hardware or a full vanity swap, we look for the KraftMaid label inside the first drawer or on the back of the cabinet, plus the part number stamped on the hinge or glide. If the label is gone, we measure the door overlay (the amount the door overlaps the cabinet frame) and the hinge cup diameter. That’s the only honest way to match a replacement. For glides, we check whether it’s a side-mount epoxy-coated glide or an undermount soft-close unit, because KraftMaid changed suppliers around 2016 and the mounting holes do not always line up on older cabinets.
For most homeowners, an OEM KraftMaid part costs more than a quality aftermarket equivalent from Blum, Salice, or Hafele, and the aftermarket part often lasts longer. We stock both on our trucks for common KraftMaid hinge and glide failures, and we’ll tell you which one makes sense for your cabinet before we quote the work.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer glides that grind or sag. KraftMaid bathroom drawers see daily humidity swings in San Diego, especially in homes without bathroom exhaust fans. The epoxy coating on older side-mount glides wears thin, and the ball bearings start to drag. You’ll feel it as a rough pull or see the drawer sit low on one side.
- Hinges stripping out of the door or frame. KraftMaid doors on the Basics and Passport lines use particleboard cores, which hold hinge screws well until years of opening and closing with damp hands loosens the threads. Once the screw hole is wallowed out, the door hangs crooked and eventually won’t close at all.
- Peeling or bubbling at the door edge. Bathroom heat, steam, and occasional splashback break down the thermofoil or veneer edge banding on KraftMaid doors and drawer fronts. The peel always starts at a corner or along the bottom rail where water sits after a shower.
- Swollen cabinet boxes near the base. San Diego’s coastal humidity, combined with toilet overflows or shower splash that never got wiped down, causes the toe kick and side panels of MDF or particleboard KraftMaid vanities to swell. The box itself stays intact, but the base kicks out and the doors no longer align.
- Drawer fronts separating from the box. KraftMaid fastens drawer fronts with a combination of glue and screws, and in high-moisture bathrooms, the glue bond fails first. You’ll notice the front pulling away from the drawer box when you open it, which only gets worse if the drawer is overloaded.
Replacement Cost & What’s Included
Here’s what we quote in San Diego for KraftMaid bathroom work, and what moves the number.
- KraftMaid hinge or glide replacement (single cabinet): $945 – $3,540 installed, depending on how many doors and drawers are involved and whether we’re using OEM KraftMaid parts or Blum aftermarket hardware.
- Bathroom vanity installation (new KraftMaid or replacement cabinet): $945 – $3,540 for the labor, plus the cabinet cost, which runs $1,200 – $4,500 for most KraftMaid bathroom vanities in San Diego showrooms.
- Partial bathroom refresh (vanity, countertop, sink, hardware): $5,900 – $14,160.
- Full KraftMaid bathroom remodel (new cabinetry, countertop, plumbing trim, tile or shower surround): $10,620 – $33,040.
The range is driven by three things: the number of cabinets being touched, the countertop material (a KraftMaid vanity with a Cambria, Silestone, or Caesarstone top runs higher than one with a cultured marble top), and whether we’re repairing existing KraftMaid boxes or pulling them and setting new ones. Every quote includes parts and labor as separate line items, and the work carries our 365-Day Done Right Promise. If a hinge we installed fails inside that year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a KraftMaid hinge or drawer glide is a safe, reasonable DIY project for a homeowner with a screwdriver and fifteen minutes, as long as the screw holes are still solid. Match the hinge cup size and overlay, swap it out, and you’re done. Same story for a single drawer glide.
Where DIY goes wrong is when the cabinet box itself has swelled, the hinge screws have stripped out of particleboard, or you’re dealing with a vanity that needs to be disconnected from plumbing, shimmed level, and reset. Opening a wall or moving a vanity means plumbing and potentially wiring, and that’s work you want a licensed San Diego contractor to handle. If you’re not sure which side of the line your job falls on, call (619) 604-9624 and describe what you’re seeing. We’ll tell you over the phone whether it’s a Sunday-afternoon fix or a job for our crew.
FAQs
In San Diego’s climate, KraftMaid bathroom vanity cabinets typically last 15 to 25 years before doors, glides, or boxes need real attention. The hardware usually fails first, while the cabinet boxes themselves often remain sound unless they’ve been repeatedly exposed to standing water. A well-maintained KraftMaid vanity with good ventilation can easily outlast a homeowner’s patience with the bathroom’s original layout.
Yes, in most cases a stripped hinge screw hole can be repaired with a proper wood dowel and re-drilled, and a worn drawer glide can be replaced with a matching undermount unit. We repair rather than replace whenever the cabinet box is square and the door or drawer front is still intact. Call (619) 604-9624 and describe the symptom, and we’ll tell you honestly whether you’re looking at a repair or a replacement.
A straightforward single-vanity swap, including disconnect, leveling, reconnect, and clean-up, takes one day on site. If we’re also changing the countertop, faucet, or doing any tile or plumbing-trim work, expect two to three days. We give you a written arrival window before work starts, and we stick to it.
We stock common KraftMaid-compatible hinge and glide replacements from Blum, Salice, and Hafele on our trucks for same-day repairs. For OEM KraftMaid parts or full cabinet replacement, we source from San Diego suppliers and give you a written timeline before any purchase is made. We also work with Cambria, Silestone, and Kohler products when the job calls for a matching countertop or fixture upgrade.
Call Penhallow Remodeling San Diego
If a KraftMaid hinge is grinding, a drawer front is peeling, or a vanity is swelling at the base, call (619) 604-9624 for a free estimate. A live person answers, every time, no voicemail maze. We’ll give you a written price before any work starts, tell you exactly what’s behind the panel, and leave your bathroom cleaner than we found it. Tell me what you need, I’ll tell you what it costs, and we’ll go from there.
Written by Trevor Nash, Owner, Penhallow Remodeling San Diego at Penhallow Remodeling San Diego, serving San Diego and nearby areas.
