Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why San Diego Homeowners Choose CWS Construction
We provide independent San Diego Cws service across the county, from cabinet and countertop work in North Park bungalows to tub-to-shower conversions in La Jolla hillside homes. Our crews have spent years studying the exact installation details that make or break a CWS remodel, and the work comes with a written price up front and a 365-Day Done Right Promise in writing before we touch a single cabinet box. We are not a CWS-authorized dealer, and we’ll be straight about that from the first phone call. What we are is a San Diego contractor that knows CWS Sonoma and Catalina cabinetry, ReadyCurb roof curbs, and CWS countertop overhang specs well enough to spot the failure coming before you do. Call (619) 604-9624 for a free estimate.
Key Takeaways
- Independent CWS service provider serving all of San Diego County since Trevor Nash first picked up a framing hammer at Los Angeles Trade-Technical College and later ran crews across Mission Hills and Balboa Park.
- Written price before any work starts, written guarantee on every job, and a 365-Day Done Right Promise if something fails.
- We fix the installation mistakes that cause most CWS failures: unshimmed cabinets on settled slabs, unsupported countertop overhangs, and improperly flashed ReadyCurb curbs.
- OEM parts when they’re the better call, premium aftermarket when coastal San Diego’s salt air demands more.
Why Trust Penhallow Remodeling San Diego for Your CWS Construction?
Trevor Nash runs our San Diego operation the way he’s run remodeling crews for the better part of two decades: measure honestly, explain the substrate, and leave the job site cleaner than we found it. He learned framing at Los Angeles Trade-Technical College and never lost the habit of spelling out exactly what’s behind a wall before anyone pulls a permit. That matters with CWS products because most CWS failures we see in Cws in Chula Vista and throughout the region are not product defects. They’re installation shortcuts. A CWS Sonoma cabinet door that rubs is usually sitting on an out-of-level slab that someone didn’t shim. A CWS quartz overhang that cracks at the sink cutout is usually missing corbel support. We know what those failures look like, and we know how to correct them without hiding them behind caulk. Every technician who walks into your San Diego home is background-checked, uniformed, and trained on CWS-specific installation details. And the live person who answers our phone 24/7 can book the visit without a voicemail maze.
Styles & brands we work with
Common CWS Construction Problems We Fix in San Diego
- CWS Sonoma Series cabinet hinge-side sag and door misalignment. San Diego’s older slab-on-grade homes in Clairemont and Mira Mesa settle over decades. When a lower cabinet runner isn’t shimmed to true level before the box is set, the doors start rubbing or the soft-close hinges bind. We re-square the box, shim to level, and replace worn hinges so the doors swing like the day they were built.
- CWS Catalina Series drawer runner binding on uneven floors. The Catalina line uses a lower-profile runner that’s less forgiving of a 1/4-inch floor dip. In canyon-adjacent neighborhoods like Mission Hills, where slab movement is common, we see Catalina drawers that stick or grind. The fix is a full base re-level and runner adjustment, not a drawer slam and a shrug.
- CWS ReadyCurb roof curb leaks at the curb-to-deck transition. This is the most common CWS roofing failure we see in San Diego, and it’s almost always a flashing issue. When the original roof membrane isn’t stripped back and re-flashed to CWS’s installation detail, water finds the seam. We see it after wet winters, especially on coastal homes where the marine layer keeps everything damp longer.
- Hairline cracks in CWS quartz and granite countertop overhangs at sink or cooktop cutouts. Any overhang over 10 inches needs real corbel support. When an installer skips the corbels or uses undersized ones, the stone flexes at the cutout, which is the weakest point. Within a few years, you get a hairline crack radiating from the sink corner. We see this constantly in San Diego condos where installers rushed the job.
- CWS tub-to-shower conversion leaks at the wall-to-pan junction. CWS fiberglass tub-shower combos have a flange detail that must be furred out to match the wall board thickness. When an installer skips the furring, the wall board sits proud of the flange and water gets behind it. In San Diego’s wet winter season, that leak shows up as a soft spot below the valve wall, and by then the damage is done.
CWS Parts & Our Repair-vs-Replace Approach
We use OEM CWS cabinet hardware, door bumpers, and adjustable shelf pins whenever they’re available quickly through our San Diego building supply partners. For roof curb gaskets and countertop support brackets, we often specify premium aftermarket components that outperform the original, especially in coastal San Diego’s salt air, which is harder on metal than anything CWS’s default gasket material was designed for. Our repair-vs-replace rule is simple and we’ll tell you straight: we only recommend replacing a CWS cabinet box or roof curb when the cost of repair parts and labor exceeds 60% of a new unit. If a shim and a hinge adjustment fixes it, that’s what we recommend. Tell me what you need, I’ll tell you what it costs, and we’ll go from there. Call (619) 604-9624 to get a written number.
Our CWS Service Process – Step by Step
- 1
Diagnosis in person. We come out, listen to what you’re seeing and hearing, and then examine the actual installation. For a CWS cabinet issue, we’re checking the floor level under the box, the hinge alignment, and the runner condition. For a tub-to-shower conversion, we’re looking at the existing flange, the wall board, and the drain placement before we quote anything.
- 2
Repair or install with CWS-specific detail. For cabinets, that means shimming the base to true level before we re-hang doors or replace runners. For countertops, that means corbel support at every overhang over 10 inches before stone goes down. For ReadyCurb work, that means stripping back the roof membrane to CWS’s flashing detail and re-securing the curb to deck properly.
- 3
Test the work. We cycle every door and drawer, run water at every seam we touched, and check level with a real level, not an eyeball. If a CWS soft-close hinge still hesitates, we address it before we call the job done.
- 4
Written warranty on every job. Every CWS repair or install from Penhallow Remodeling San Diego includes a written guarantee and our 365-Day Done Right Promise. If the work fails inside the guarantee period, we come back and fix it at no charge. No re-inspection fee, no service call charge.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in San Diego
We work on the full range of CWS kitchen and bath products you’re likely to have in a San Diego home. Our crews regularly service and install CWS Sonoma Series Cabinets, known for their full-overlay doors and soft-close hardware, and CWS Catalina Series Cabinets, a more compact line that’s common in San Diego condos and smaller kitchens. On the roofing side, we repair and replace CWS ReadyCurb Roof Curb Systems and install CWS Architectural Standing Seam panels. We keep common CWS hardware, hinge clips, shelf pins, and shim stock in our San Diego service vehicles so we’re not sending a technician back to a supply house mid-job. Our local building supply partners keep us stocked on the larger items.
We Also Service These Brands
While we know CWS inside and out, we also install and service cabinets from KraftMaid, quartz from Cambria and Silestone, and fixtures from Kohler, among others. That matters because most San Diego homes mix brands. A CWS cabinet install next to a KraftMaid pantry is normal, and we’ll handle both without blinking.
FAQs – CWS Construction Service in San Diego
Yes. Both lines need to be shimmed to true level before the box is anchored, because El Cajon Cws service calls and San Diego slab-on-grade homes in neighborhoods like Clairemont and Mira Mesa have settled over the decades. If the installer skips the shim step, you’ll get hinge-side sag and rubbing doors within a few years. Call (619) 604-9624 for an exact quote on a cabinet re-level and repair, estimates are free.
In almost every case we see in San Diego, the cause is an unsupported overhang. CWS quartz overhangs of 10 inches or more without adequate corbel support flex at the sink or cooktop cutouts, and hairline cracks or chips appear within a few years. The fix is adding heavy-gauge corbel support and, if the stone is too far gone, replacing the slab. Call (619) 604-9624 for a free estimate on countertop support or replacement.
Often we can, yes. The key detail is the existing CWS fiberglass flange at the wall-to-pan junction. If the flange is intact and we furr out the wall to match CWS wall board thickness, the conversion can use the existing drain location. If the flange is cracked or the pan has settled, we’ll tell you straight that a full pan replacement is the smarter call. Call (619) 604-9624 to schedule an in-person assessment.
Yes. We source OEM CWS roof curb gaskets and hardware through our San Diego building supply partners, and for older curbs where the original gasket material has degraded in coastal salt air, we specify premium aftermarket gaskets that hold up better. Call (619) 604-9624 if you’re seeing water at the curb-to-deck transition and want an honest look before winter’s wet season.
Floor level. San Diego condos, especially older buildings, rarely have true level slabs. An installer who doesn’t shim the base cabinet to level before hanging doors will create a laundry list of small problems: rubbing doors, binding soft-close hinges, and drawers that don’t close all the way. We re-square and shim every CWS cabinet box we touch, no exceptions. Call (619) 604-9624 for a free estimate.
Here’s a straightforward look at what CWS work typically runs in San Diego County:
| CWS Service | Typical San Diego Price Range |
|---|---|
| CWS cabinet installation (per standard linear foot, labor only) | $4,720 – $15,340 |
| CWS quartz or granite countertop installation (per square foot installed) | $2,360 – $7,670 |
| CWS tub-to-shower conversion (full labor and materials) | $4,130 – $11,800 |
| CWS ReadyCurb roof curb replacement (per curb, tied into existing roof) | $9,440 – $23,600 |
Your actual number depends on the condition of what’s behind the wall, the scope of the prep work, and the materials you choose. We give you a written price before any work starts, so the number on day one is the number on the invoice. Call (619) 604-9624 for an exact quote, estimates are free.
Book Your CWS Service in San Diego, CA
If you have a CWS cabinet, countertop, or roof curb that needs a real fix from a team offering General Contractor services, call (619) 604-9624. We’ll talk through what you’re seeing, book a walkthrough, and put a written number in front of you before anything gets touched. Written price, written guarantee, and a 365-Day Done Right Promise on every job.
Written by Trevor Nash, Owner at Penhallow Remodeling San Diego, serving San Diego County.
